Browse all practice questions for the Alabama Dispensing Propane Safely Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Alabama Dispensing Propane Safely Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Tare Weight is required when calculating cylinder filling by weight. Which option correctly identifies what tare weight represents?
  • How should you handle a near-miss incident in propane dispensing?
  • Cylinder specification markings consist of the design code and the ___________ of the cylinder.
  • RV tanks are used to supply propane appliances; therefore, appliance pilots and electronic ignition systems must be turned off before beginning the filling operation.
  • Before inspecting a cylinder, you should remove what to help spot problems?
  • What should be checked before connecting a propane cylinder to a regulator or hose?
  • An OPD on portable propane cylinders is designed to prevent which event?
  • Which practice helps reduce the chance of producing a static spark when handling propane?
  • What action should you take if a propane fire starts at the source?
  • Prior to inspecting a cylinder you should _______________________ to help spot any problems.
  • When relighting pilot lights, carefully follow which instruction?
  • Cylinders awaiting resale must be stored in which positions?
  • Cylinders may not be filled if they are past their ____________ date.
  • During filling by volume using a fixed maximum liquid level gauge, who determines when the maximum permitted filling limit for a cylinder is reached?
  • Which part of a forklift cylinder serves as the base that helps keep it upright?
  • ____ cylinders subjected to a fire must be permanently removed from service.
  • When changing out a forklift cylinder, the cylinder service valve should be ______ prior to making the hose connection to the cylinder?
  • Which is a typical precaution when dispensing propane outdoors in windy conditions?
  • Which feature provides protection for the valves on portable cylinders?
  • What is the recommended action if a regulator or hose is found to be damaged?
  • The marking '4B240' tells you that the cylinder is made of _______________
  • Which statement describes a daily pre-use inspection of a propane dispensing station?
  • How often must all fire extinguishers receive a visual inspection?
  • Which of the following best describes environmental factors that can affect propane storage safety?
  • Which code commonly governs safe storage, handling, and dispensing of propane in the industry?
  • Tare weight and water capacity of a cylinder are marked on which part?
  • What does the hydrostatic test date indicate on a propane cylinder label?
  • What is the role of NFPA 58 in propane safety?
  • Which device provides an additional level of emergency shut-down capability?
  • Composite cylinders are made from a combination of which materials?
  • Problems that prevent filling a cylinder include ________.
  • Which task is NOT the responsibility of a propane dispenser operator?
  • What action is required if no operator is present at the dispensing site?
  • Platform balance beam scales must bear which marking?
  • What is bonding and grounding and why is it necessary during dispensing?
  • Full or empty containers can be stored indoors?
  • How does the odorant mercaptan aid propane safety?
  • In many jurisdictions, closed bodied vehicles may have a maximum propane capacity of how many pounds, with no single container exceeding how many pounds?
  • Why is propane heavier than air important for leak response?
  • Liquid propane will _____ when heat is added to it.
  • What signs should you look for when inspecting piping and hoses for wear?
  • What is a proper method to check for leaks on a new or reconnected propane system?
  • Which activity should be avoided when transporting propane cylinders within a facility?
  • The proper mixture of propane vapor, air, and ______ is needed for propane to burn.
  • Who is best qualified to perform routine propane dispensing equipment inspections?
  • What does 'fill to 80% of water capacity' mean for propane cylinders, and why?
  • Before filling, new cylinders not vacuum purged must be purged of what?
  • Bonding and grounding during propane dispensing primarily helps to:
  • What is a safe practice when purging a new hose or regulator before dispensing?
  • How should you identify the correct regulator and hose for a propane system?
  • When preparing to fill RV tanks, which components must be shut off to eliminate ignition sources?
  • Cylinders should be positioned in customer vehicles so that the __________ is in communication with the vapor space.
  • What is an MSDS?
  • Why are gloves and other PPE worn when filling propane containers?
  • What is the foot ring on a propane cylinder used for?
  • What permits must be present at the dispensing facility before filling a composite cylinder?
  • The purpose of the O-ring inside the forklift connector is to provide a gas tight seal.
  • What is the purpose of odorant in propane?
  • When heat is applied to liquid propane, what happens to its volume?
  • What steps ensure a safe return or exchange of empty cylinders?
  • Which instrument determines the maximum fill when filling cylinders by weight?
  • How should propane cylinders be stored?
  • In forklift procedures, what is the purpose of the location pin?
  • What is used to properly position the cylinder on the forklift?
  • Which statement about labeling and inspection is true?
  • What is the recommended approach to training and competency for propane dispensing personnel?
  • Which feature is located at the bottom of the cylinder to protect against corrosion or damage?
  • For motor fuel tanks, a propane decal is typically located near the ____ of the vehicle near the bumper.
  • Which statement best describes an MSDS?
  • Which statement about standards guiding propane safety practices is most accurate?
  • Propane autogas refueling stations are typically used to refuel which of the following?
  • Why is it unsafe to smoke or have open flames near a propane dispensing area?
  • Which components on composite cylinders are identical to those used on steel or aluminum cylinders?
  • Which of the following describes proper organization of a propane dispensing area to minimize risk?
  • Which device is used to determine when a tank has been adequately filled?
  • What action is proper if a regulator or hose is damaged during dispensing?
  • What is the purpose of hydrostatic testing on propane cylinders?
  • Which of the following items would you inspect during a daily pre-use inspection?
  • For portable cylinders not filled on site and 100 pounds or less, which labeling is required?
  • Which practice is required when filling forklift cylinders by weight?
  • What is the purpose of a regulator in a propane dispensing system?
  • Which statement best describes the role of pressure regulation in propane safety?
  • DOT requires that cylinders be clearly labeled with
  • All ignition sources must be at least ____ feet from the motor fuel dispenser.
  • Before placing a cylinder into service for dispensing, what checks should be performed?
  • A one-pound steel refillable cylinder is used to fuel which items?
  • Which action sequence is recommended during an indoor propane leak?
  • What on composite cylinders is identical to those used on steel or aluminum cylinders?
  • When a steady white stream is emitted from the fixed maximum liquid level gauge, the next step is to immediately ______.
  • The location pin on the forklift is used to _________________________.
  • What is the primary health and safety hazard when propane leaks occur indoors?
  • The relief valve on a propane cylinder should be located in which space?
  • What action should you take if you detect a strong propane odor outdoors near equipment but cannot locate the leak?
  • Propane liquid released into the air will expand to ____ times its original volume.
  • Which component functions as the cylinder's supporting stand or base?
  • What is the main purpose of installing proper packaging and securing requirements in transporting propane cylinders?
  • An OPD serves as a ______.
  • Which practice is appropriate for electrical equipment around propane dispensing areas?
  • What should you do if you observe abnormal discharge from a regulator relief valve?
  • Which statement is true about fire extinguishers in propane storage areas?
  • The marking 4B240 indicates the cylinder is made of which material?
  • What should be confirmed about an empty cylinder before it is returned to a supplier?
  • Why should you never top off a propane cylinder?
  • Which statement about transporting a propane cylinder during vehicle transport is correct?
  • When filling a forklift cylinder by volume, what should be done with the fixed maximum liquid level gauge?
  • Which term indicates the weight of the cylinder when empty?
  • Container water capacity is multiplied by ________ when determining propane capacity.
  • What space should the relief valve be placed in on a propane cylinder?
  • Which filling practice is unique to one-pound refillable cylinders?
  • Which component must be in communication with the vapor space to ensure safe placement in a vehicle?
  • Why is static electricity a concern during propane dispensing?
  • Many jurisdictions limit closed bodied vehicles such as passenger cars and vans to a maximum of ________ pounds propane capacity with no single container having a capacity of more than ________ pounds.
  • What does effective supervision contribute to dispensing propane?
  • Forklift cylinders typically hold how many pounds of propane?
  • During pre-fill inspection, which issues are commonly checked?
  • The letter 'E' following the date on the cylinder indicates requalification is required again within how many years of the marked date?
  • Which statement best describes PPE use when handling propane cylinders inside a facility?
  • Permanently mounted mobile motor fuel and RV tanks are built to ____ specifications.
  • Which action should be completed immediately after the filling process?
  • Which statement is true about the DOT-4BA240 cylinder designation?
  • Propane autogas refueling stations and dispensaries are typically used to refuel which groups?
  • Relief valves on forklift cylinders must be replaced within how many years of the manufacture date & every how many years thereafter?
  • Where is the propane decal located on motor fuel tanks?
  • What sequence of actions after a near-miss should be taken to improve safety?
  • Stored cylinders must be at least how many feet away from gas station fuel dispensers?
  • Which action would undermine safety and should be avoided if you notice a problem with propane equipment?
  • Before a cylinder can be filled or refilled, DOT regulations require a ______ to verify it is fit for continued service.
  • Which PPE is generally recommended when dispensing propane?
  • When relighting pilot lights, which instruction should be followed?
  • What distance must cabinets be from doorways of public buildings?
  • How should a damaged cylinder valve cap be treated?
  • When filling forklift cylinders by weight, what must be verified at the end of the filling process?
  • Gloves and other PPE are required when filling containers because of the ______ of liquid propane.
  • Which problem can be caused by cylinders not properly purged of air or moisture?
  • Which statement about tare weight is true?
  • Most propane dispensers include a component that supplies propane to the dispensing equipment. Which component is it?
  • Empty exchange cylinders should be handled in the same manner as which cylinders?
  • Leaks, cracks, or bulging are often discovered during which inspection of forklift cylinders?
  • New cylinders that have not been vacuum purged by the manufacturer and cylinders that have been opened to the atmosphere must be ___________ prior to filling.
  • Which type of cylinders subjected to a fire must be permanently removed from service?
  • What is the primary purpose of ongoing safety training for propane dispensing personnel?
  • Which agency regulates the transportation of propane cylinders?
  • When filling RV's the service valve on the tank and ___________________________ should be shut off to eliminate all ignition sources
  • The proper total weight of the filled cylinder is equal to tare weight plus _______.
  • Cabinets used to store propane cylinders must be placed at least how many feet from doorways of public buildings?
  • Which statement describes proper organization of a propane dispensing area to minimize risk?
  • What should be included in incident reporting for propane safety events?
  • What is the purpose of a leak test after connecting a cylinder to a system?
  • Inside a facility, how should propane cylinders be moved to maintain safety?
  • Pressure-relief valves should be directed upward at what degree angle when the forklift cylinder is mounted horizontally?
  • What is the basic safety action to ensure safe propane dispensing in storage and handling areas?
  • Why is it important to keep cylinder valves closed when cylinders are not in use?
  • What is the recommended emergency shutdown sequence?
  • What must be present at the dispensing facility before a composite cylinder can be filled?
  • If a cylinder label is not legible or if the paper or plastic sleeve is removed during inspection, ________ before releasing the cylinder to the customer.
  • Consumer information/warning labels must be on all portable refillable cylinders not filled on site and with ______ pounds propane capacity or less.
  • In an emergency shutdown during a suspected propane leak, what is the first action you should take?
  • ____ is added to propane to increase the likelihood that a leak will be detected
  • The absence of a letter after the date on the cylinder indicates requalification is required within how many years?
  • What should you do regarding empty propane cylinders?
  • When filling cylinders by weight, the ____ is used to determine that the cylinder has reached its maximum permitted filling level.
  • What is the primary function of the O-ring inside the forklift connector?
  • In propane storage, more than how many pounds require an approved portable fire extinguisher?
  • When the operator is not in attendance, the dispenser should be
  • What is the correct role of a regulator in propane dispensing?
  • If there is no letter following the date stamped on the cylinder, requalification is required within how many years?
  • When a white mist appears from the fixed maximum liquid level gauge while filling a mobile motor fuel or RV tank, immediately shut off the
  • If you suspect a propane leak and cannot quickly identify the source, what is the proper response?
  • Which statement best describes the purpose of a remote shutdown capability?
  • Composite cylinders are made from a combination of which materials?
  • When filling propane containers, customers should be asked to ________.
  • How should electrical equipment be managed around propane dispensing areas?
  • Why is good ventilation essential in propane storage areas?
  • Which of the following is typically not the responsibility of a propane dispenser operator?
  • In order to allow for liquid expansion, propane containers are typically filled to ______ % of their capacity.
  • A blue green stain on the brass portion of the cylinder valve is evidence that it has been in contact with ______ ____.
  • What is the role of hydrostatic testing for propane cylinders?
  • Why is labeling important on propane cylinders?
  • Why should propane equipment be inspected by qualified personnel?
  • Which of the following is NOT part of the required cylinder markings?
  • What is the correct handling procedure for a cylinder that appears dented or bulging?
  • Which statement best describes how propane vapor and liquid are handled?
  • Fire extinguishers are primarily used on which type of fires?
  • Which additional regulations commonly govern propane safety along with NFPA 58?
  • What is the role of supervision and written procedures in dispensing propane?
  • What is the overarching safety principle for propane dispensing?
  • Which chemical is associated with a blue-green stain on the brass valve?
  • In a DOT-4BA240 specification cylinder, the '240' indicates the cylinder's ...
  • A one-pound steel refillable cylinder is used to fuel which of the following?
  • Which filling practice is unique to one-pound refillable cylinders?
  • Propane released into the air expands to about how many times its original volume?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy